OxySafe (NFPA 99 Compliance Kit): What It Is and Why We Offer It
NFPA 99, the Health Care Facilities Code, sets a fire-safety limit on how much oxygen is allowed to accumulate inside a hyperbaric chamber during use. Most chamber owners never hear about it until an inspector, an insurer, or a landlord asks. Our OxySafe is the engineered answer to that question — a complete system, built to fit your specific chamber, that keeps the interior atmosphere fresh and safely under the threshold for the entire session.
The short version
- NFPA 99 limits how much oxygen may build up inside a hyperbaric chamber during a session. It is a fire-safety issue, not a therapy question.
- The kit keeps the chamber atmosphere fresh and certified-safe while you use it, sweeping out exhaled gases and keeping the interior atmosphere safely below that threshold.
- Every kit is built to order for your specific chamber, works across all major brands, and includes install guidance from our team.
- $4,000 plus $100 shipping. Order online and a specialist confirms your configuration before anything is built.
What NFPA 99 actually is
NFPA 99 is the National Fire Protection Association's Health Care Facilities Code. Among many other things, it addresses hyperbaric environments — and the concern there is straightforward physics rather than anything controversial: oxygen does not burn, but it makes everything else burn faster and hotter. Concentrate enough of it in a small enclosed space and you have changed the fire risk of that space, full stop.
So the code sets a ceiling on how oxygen-rich the interior atmosphere of a chamber is allowed to become while someone is inside it. That is the entire concern. It is the same reasoning behind every other rule you have heard about chambers — no loose electronics inside, no oils or aerosols, no unrated devices — applied to the air itself.
Why oxygen builds up in the first place
This surprises people who assume a sealed chamber stays at whatever the compressor put in it. It does not. During a session:
- The occupant is breathing supplemental oxygen through a mask or cannula, and not all of it goes into their lungs. What escapes ends up in the chamber.
- Every exhale adds carbon dioxide and moisture to a fixed volume of air.
- The longer the session and the more sessions you stack back-to-back, the further the interior atmosphere drifts from where it started.
Unmanaged, that drift moves in exactly the wrong direction on both counts: stale, humid air for the person inside, and a rising oxygen concentration from a fire-safety standpoint.
What the kit does
The OxySafe is a complete, engineered system that keeps the chamber atmosphere fresh and certified-safe for the entire session. That does two things at once:
- Keeps the atmosphere inside the code ceiling. Fresh air moving through means oxygen and exhaled gases are swept out rather than accumulating.
- Makes the chamber genuinely nicer to be in. Owners notice this before they notice anything about compliance — less stuffiness, less humidity, no stale end-of-session air.
It is not a sensor, an alarm, or a paperwork package. It is the hardware that manages the problem, custom-built for your chamber, with everything needed to install it and guidance from a specialist who has done it before. If you want to measure and document what the atmosphere did during a session, that is a different tool — see the note on monitoring below.
Why we offer it
Honestly? Because our customers kept asking and the market kept giving them bad answers.
We service chambers for a living, which means we see what people are actually running. When a clinic, gym, or wellness studio gets a question from an inspector, an insurance carrier, or a commercial landlord about chamber oxygen accumulation, they need something real to point at. What we were finding instead were improvised setups — parts bought online, assembled by whoever was handy, no engineering behind them and no one to call when something failed. That is worse than doing nothing, because it looks like a solution.
There is also a self-interested reason, and we will say it plainly: we do not want to sell a chamber into a facility that then fails an inspection or gets a call from its carrier. Being the company that hands you the equipment and the compliance answer is better for you and better for us than being the company that sold you a chamber and disappeared.
So we built one kit, properly engineered, made to order per chamber, and we sell it at a fixed published price instead of quoting it case by case. It is listed as a featured chamber add-on rather than buried, because the people who need it need to be able to find it.
Who actually needs one
- Clinics, studios, gyms, and any commercial operator. If someone other than you or your family uses the chamber, this is the add-on to take seriously.
- Anyone facing an AHJ review, an inspection, or an insurance question. This is the component that comes up.
- Facilities running back-to-back sessions. Higher utilization means less time for the interior atmosphere to settle between users.
- Home owners who want maximum margin. Not required the way it is in commercial settings, but some owners want it anyway — and some get asked by an insurer or HOA.
What is included
- A complete NFPA 99 compliance system, custom-built for your specific chamber and configuration.
- All hardware, fittings, and connections needed for installation.
- Install guidance from a Prestige Hyperbaric specialist — we do not hand you a box and wish you luck.
- A 12-month warranty on all supplied components.
- The full owner's manual as a free download, including the chamber compatibility list.
Chamber compatibility
Because every chamber is different, each kit is engineered to fit yours. We have confirmed builds for:
- Prestige Hyperbaric
- Oxycell
- OxyRevo
- Oxygen Health Systems
- Airvida
- Macy-Pan
- Olive
- Summit to Sea
- Vitaeris
Chamber not on the list? Contact us. We have built for every configuration we have seen so far, and if we cannot build for yours we will tell you that instead of taking the order.
If your reason is documentation, add monitoring
There is a difference between managing the atmosphere and proving what it did. The kit handles the first. If you need the second — a record you can put in front of an inspector, a carrier, or your own safety officer — pair it with the Oxygen Analyzer Premium add-on for real-time oxygen measurement you can log. Facilities focused on compliance evidence generally want both: hardware that controls the environment, and instrumentation that documents it.
How to order
- Order online. The kit is $4,000 plus $100 shipping through our online store. You can also contact us first if you would rather talk it through.
- A specialist confirms your chamber. After purchase we reach out to confirm your exact model and configuration so the kit is built to fit.
- We build and ship to fit. Made to order, not pulled off a shelf, and shipped with everything needed to install it.
- You install with our guidance. Follow the manual with a specialist available by phone. Local to Tampa Bay? Ask about having our techs handle it.
Quick self-check: do I need one?
Tick any that apply. The more you tick, the more we'd recommend the kit.
- A clinic, med-spa, or wellness studio uses this chamber for paying clients.
- A landlord, HOA, or building manager has asked for fire-safety documentation.
- A home or business insurance carrier wants proof the chamber stays under NFPA 99 limits.
- A local inspector or Authority Having Jurisdiction has flagged the chamber.
- The chamber lives in a small, enclosed room with limited passive ventilation.
- You expect to resell or transfer the chamber and want clean documentation on file.
- You simply want the peace of mind of a documented compliance posture.
NFPA 99 Kit FAQ
Does buying this kit make my facility NFPA 99 compliant?
It addresses the chamber-atmosphere piece, which is the part most operators get asked about. Full facility compliance with NFPA 99 is determined by your local Authority Having Jurisdiction, and it covers more than one piece of equipment. We will not tell you a purchase closes an inspection for you — but this is the component inspectors and insurers ask us about most.
Will it fit my chamber if I did not buy it from Prestige?
Usually, yes. Every kit is built to order for a specific chamber and configuration, and we have built for Prestige, Oxycell, OxyRevo, Oxygen Health Systems, Airvida, Macy-Pan, Olive, Summit to Sea, and Vitaeris chambers. If your chamber is not on that list, send us photos and the model and we will tell you honestly whether we can build for it.
Do I need this for a chamber at home?
It is not required for a personal residential chamber the way it comes up in commercial settings. Home owners buy it for two reasons: they want the largest possible fire-safety margin, or their insurer or HOA asked a question they could not answer. If you are unsure, call us and describe the setup before you buy.
What exactly do I get for the price?
A complete compliance system custom-built for your chamber, all the hardware and fittings needed to install it, install guidance from one of our specialists, and a 12-month warranty on the supplied components. The owner's manual is a free download, so you can read the install and safety sections before you order.
How long does it take to get one?
Because each kit is built to order, it is not a same-day ship like an accessory. After you order, a specialist confirms your chamber model and configuration, and we build and ship to fit. Ask us for a current lead time when you call — we would rather give you a real date than a generic one.
Is the online price the whole price?
Checkout is $4,000 plus $100 shipping. If your chamber configuration needs something outside what we normally build, we will talk it through with you before anything is built or shipped — no surprise change orders.
Should I add oxygen monitoring too?
If your reason for buying is documentation — showing an inspector or insurer what the atmosphere actually did during a session — then yes, pair the kit with the Oxygen Analyzer Premium add-on. The kit manages the atmosphere; the analyzer is how you measure and record it.
NFPA 99® is a registered trademark of the National Fire Protection Association. Full facility compliance with NFPA 99 requires review by your local Authority Having Jurisdiction (AHJ), and this article is general information rather than a compliance determination for your site. Prestige Hyperbaric is not a medical facility and does not diagnose, treat, cure, or prevent any disease or condition.