All-in-One Replacement Intake Filters Now Available — $25 Each
You can now order replacement intake filters for all-in-one hyperbaric chamber units straight from our site. They are $25 per filter with a flat $25 shipping charge, and most all-in-one units take four.
Key Takeaways
- Replacement intake filters for all-in-one units are $25 each, plus a flat $25 shipping charge.
- Most all-in-one units require 4 filters — set the quantity to 4 for a complete change.
- They fit Prestige chambers, OxyRevo-style chambers, Airvida, some Oxycell chambers, and other brands that use the standard all-in-one intake.
- Not sure about your unit? Send a photo of your current filter and we will confirm fitment before you buy.
Why intake filters matter
The all-in-one unit is the box that feeds your chamber — the air compressor, and on most units the oxygen concentrator and cooling, in one cabinet. Every breath of air the chamber gets is pulled through its intake filters first. When those filters load up with dust, the compressor works harder to move the same air, runs hotter, and takes longer to bring the chamber up to pressure.
Clogged intake filters are the most common preventable cause of early compressor pump failure we see on the service bench. A filter costs $25. A replacement compressor pump costs a lot more.
What you are ordering
- All-in-One Replacement Intake Filter — sold individually at $25 per filter
- Flat $25 shipping to the lower 48
- Most all-in-one units require 4 filters. Set the quantity to 4 at checkout for a full change
- Ships from our Florida shop
Which chambers they fit
These filters are built for the standard all-in-one intake used across the industry. That includes:
- Prestige Hyperbaric chambers — Sphere of Power, Vessel of Power, Pavilion of Power and our all-in-one units
- OxyRevo-style chambers
- Airvida chambers
- Some Oxycell chambers
- Other brands that use the same all-in-one intake
Brand names are used for fitment identification only. Prestige Hyperbaric is an independent supplier and is not affiliated with any chamber manufacturer. Our parts cross-reference lists the brands and models in detail.
Check your unit before you order
Open the filter housing on your all-in-one unit and count the filter positions — most units have four. If your filter looks different from the one pictured, or you are not sure your model takes it, email a photo of the old filter and its label to prestigehyperbaric@gmail.com or call 727-591-4268. We will confirm the fit before you buy.
When to change them
Follow the service interval in your owner's manual, and change filters sooner if the unit runs in a dusty room, a garage, or near pets. A filter that looks grey or dark, or a chamber that is slower to reach pressure than it used to be, is a good sign it is time.
Need more than filters? Browse all replacement parts or book a chamber inspection.
Frequently Asked Questions
How much do the all-in-one intake filters cost?
$25 per filter, plus a flat $25 shipping charge to the lower 48.
How many filters does an all-in-one unit need?
Most all-in-one units require 4 filters. Count the filter positions in your unit's intake housing, or send us a photo and we will confirm.
Which chambers do these filters fit?
Prestige chambers, OxyRevo-style chambers, Airvida, some Oxycell chambers, and other brands that use the standard all-in-one intake. Confirm against your current filter before ordering.
This article is educational information from equipment specialists, not medical advice. Hyperbaric oxygen therapy, red light therapy, sauna, cold plunge, and PEMF are not substitutes for care from a licensed clinician. Talk to your physician before starting any new protocol, especially if you are pregnant, have a cardiac or pulmonary condition, an implanted device, or are being managed for an active medical condition.