What this is
The Prestige Hyper Chiller is our extreme-performance cold water chiller, built on a heavy-duty industrial chilling platform and finished with the Prestige Hyperbaric mark. It pairs a higher-pressure circulation pump with greater chilling capacity than a standard recirculating chiller — built for cold plunge tubs, recovery studios, and equipment cooling loops that need to pull water down fast and hold it there.
Key features
- Higher-pressure circulation pump for stronger flow through plunge tubs and longer hose runs
- Greater chilling capacity than a standard recirculating chiller — faster pull-down and better hold at low setpoints
- T-503C digital temperature controller with setpoint display and intelligent or constant-temperature control modes
- ALARM and NORMAL status indicator lamps for at-a-glance operation
- Illuminated rocker power switch
- Integrated carry handle for portable or semi-permanent installs
- Two independent cooling circuits — INLET (A)/OUTLET (A) and INLET (B)/OUTLET (B)
- Prestige Hyperbaric branded housing
Panel & connections
Every detail below is read directly from the unit in our Holiday, Florida warehouse.
| Electrical input | 110V input, IEC C14 appliance receptacle (detachable power cord) |
|---|---|
| Water connections | Four brass barbed fittings on the rear panel, labelled INLET (A), OUTLET (A), INLET (B) and OUTLET (B) — two independent supply/return circuits |
| Water level indicator | Vertical sight gauge on the rear panel with FULL, NORMAL and LOW bands |
| Drain | Manual drain valve at the lower rear of the cabinet, labelled DRAIN |
| Cooling airflow | Twin rear exhaust fans plus a full-length louvred intake panel along the side of the cabinet |
| Front panel | T-503C digital controller, ALARM and NORMAL indicator lamps, illuminated rocker power switch |
| Handling | Integrated top carry handle |
Because the chiller carries two separate inlet/outlet circuits, it can serve a single loop at higher flow or two independent loops — for example a plunge tub and an equipment cooling line — from one cabinet.
T-503C controller reference
The chiller ships with a T-503C controller. The display area cycles through water temperature, system parameters, alarm codes and other data, holding each field for about one second; after power-on the full display settles within roughly five seconds. The two indicator lamps on the left of the display report operating state:
| Indicator | State | Meaning |
|---|---|---|
| Upper-left red light (D1) | Lit | Controller is operating in intelligent control mode |
| Upper-left red light (D1) | Flashing | Controller is operating in constant temperature mode |
| Upper-left red light (D1) | Off | Controller is in parameter setting mode, or is displaying room temperature |
| Lower-left red light (D2) | Lit | Controller is in a cooled state |
| Lower-left red light (D2) | Flashing | Controller is in an uncooled state |
| Lower-left red light (D2) | Off | Controller is in a micro-cooled state |
The four keys behave as follows:
| Key | Name | Function |
|---|---|---|
| RST | Determine key | OK button — saves and exits after setting data |
| SET | Set key | Modifies the parameter settings |
| ▲ | Dial up key | Increments a numeric value or parameter entry |
| ▼ | Dial down key | Decrements a numeric value or parameter entry |
Key combinations cover factory parameter adjustment, user parameter adjustment, flow-rate and room-temperature checks, quick setpoint adjustment, and a self-test mode. The full instruction card is fixed to the unit and supplied with every chiller; call 727-591-4268 if you need a replacement or a walkthrough.
Typical uses
- Cold plunge and ice bath temperature control
- Recovery studio and wellness center water cooling
- Closed-loop equipment cooling
Not sure whether this chiller matches your tub volume or loop length? Call 727-591-4268 or email prestigehyperbaric@gmail.com and we will size it with you.
Shipping & setup
Six units are in stock at our Holiday, Florida warehouse and ship from stock. Shipping is calculated at checkout. The chiller requires adequate ventilation clearance around the intake and exhaust for rated performance; run it with clean, filtered water and inspect the loop periodically. Full electrical, plumbing, and clearance details are supplied with the unit.
Regulatory & Wellness Use Notice
Prestige Hyperbaric is not a medical facility; we do not diagnose, treat, cure, or prevent any disease or condition. Cited research, not medical advice. See our FDA Disclosure for details.
Talk to a Prestige Hyperbaric specialist
Questions about the Prestige Hyper Chiller, or want to compare it against another configuration? Our team in Holiday, Florida can help you pick the right fit.
The Research Behind This Equipment
We keep an independent research library of primary literature with over 400 citations. It is written to inform, not to sell — including the parts of the evidence that are weak or unresolved.
Browse all 11 research chapters →
Cited research, not medical advice. Prestige Hyperbaric is a wellness center, not a medical facility.