Pediatric Nasal Cannula 7ft with Straight Tip — For Hyperbaric Chamber

Sized Right for Smaller Faces

The Prestige Pediatric Nasal Cannula delivers low-flow supplemental oxygen with a pediatric-sized nasal prong assembly, designed to fit children's smaller nostrils, cheeks, and jaw comfortably. Adult-sized cannulas often slip off small faces, create pressure marks, or cause irritation from oversized prongs — this pediatric version solves all three.

Every pediatric hyperbaric session should use a cannula sized correctly for the child. A properly fitted cannula stays in place through the entire session, delivers accurate FiO2, and doesn't leave marks or discomfort.

The Prestige Difference

• Pediatric-sized nasal prongs — smaller diameter, correct spacing for children ages 2–12
• Soft, kink-resistant 7ft tubing — same medical-grade tubing as our adult cannulas
• Straight tip fitting — universal compatibility with all hyperbaric chamber oxygen ports
• Standard adjustable ear-loop and chin slide — parents can fine-tune fit in seconds
• Latex-free, phthalate-free construction — safe for sensitive pediatric skin

FiO2 Performance (Low-Flow Range)

Pediatric cannulas deliver the same FiO2 range as adult cannulas — the flow rate is what drives concentration, not the cannula size. Pediatric flow rates are typically lower to match smaller lung capacity.

Oxygen Flow Rate	Approximate FiO2 Delivered
0.5 LPM	~24%
1 LPM	~24-28%
2 LPM	~28-32%
3 LPM	~32-36%
4 LPM	~36-40%
5 LPM	~40-44%

For pediatric hyperbaric sessions, flow rates of 1–3 LPM are most common. Higher flow rates may cause nasal drying — consult your practitioner for age-appropriate settings.

When To Choose Pediatric vs. Adult Cannula

Situation	Choose
Child age 2-12, small face	Pediatric (this product)
Teen or adult, standard face	Adult Regular Cannula
Pressure sensitivity, extended sessions	Comfort Foam Cannula (adult only)

Bulk & Clinical Ordering

Pediatric clinics offering hyperbaric therapy for autism, PANS/PANDAS, cerebral palsy, or post-concussion recovery often purchase cases of 50 for consumable inventory. Case pricing offers approximately $4/unit — compared to $12 single-piece retail.

Bulk & Clinical Orders

Running a hyperbaric clinic, wellness center, or high-usage facility? Our case pricing offers substantial savings over single-unit costs, and we're happy to work with clinical operators on standing orders and custom fulfillment schedules.

• Volume discounts built into every product — see quantity pricing above
• Case orders (50 units) offer our lowest per-unit price
• Clinical accounts available — contact prestigehyperbaric@gmail.com for tax exemption, standing orders, and net terms
• Fast fulfillment — most orders ship within 1–2 business days
• Free consultation on which mask type best suits your patient population

Call 727-591-4268 or email prestigehyperbaric@gmail.com for clinical pricing and account setup.

Replacement Guidance

Replacement Schedule

For optimal safety, hygiene, and oxygen delivery efficiency, we recommend replacing your mask at least once every 30 days with regular use. High-frequency users (daily sessions) or clinical operators should replace more often. Masks are single-patient devices — do not share between users.

Signs your mask needs replacement:

• Discoloration or yellowing of the plastic or rubber
• Cracking, stiffening, or loss of pliability in seals
• Any tear, hole, or damage to the reservoir bag or tubing
• Loss of head-strap elasticity
• Persistent odor after cleaning

Order in quantity to save — our clinic case pricing brings per-mask costs down significantly.

Chamber Compatibility

Universal Fit — Works with Virtually Every Hyperbaric Chamber

Every Prestige Hyperbaric mask and hose uses standard oxygen supply fittings compatible with all major hyperbaric chamber systems on the market, including:

• OxyRevo (Elite, Apex, Forward, Quest, Space, Heal series)
• OxyNova (7, 8, and all portable models)
• OxyHealth (Vitaeris 320, Fortius 420, Solace 210, Respiro, Quamvis 320)
• Oxygen Health Systems (OxyAir, OxyFlow, LUX-AIR, Elite Serene Max, Vertical Mini)
• Newtowne Hyperbarics (C4-27, C4-34, A4-34, Long Shoe)
• Summit to Sea (Grand Dive, The Dive 33″, Shallow Dive, Grand Dive Vertical)
• Macy-Pan (ST1700, ST901, ST801, MC4000, HP2202, HE5000, and all soft/hard shell models)
• Airvida (Elite, and full chamber line)
• MedEq Fitness (TimePod Air, TimeCapsule Vision, TimeCapsule C900+)
• OxyHelp (OxyLife I, OxyLife 90L, and all monoplace models)
• Aravita (all chamber configurations)
• OxyAir / Olive (Smart Premium, YZM01, YTD04, and all Olive Electronic models)
• Tecnotu (TecnoLay Classic, TecnoLay Pro, TecnoSit, TecnoLay Ultra, Recline Soft)
• DR.HUGO / LANNX (Rejuven S200 and full lineup)
• AHA Hyperbarics (Flex 20 V2, Vita, and hybrid models)
• Peak Primal Wellness carried chambers
• Everyday Hyperbaric chambers and BIBS systems
• Perry Baromedical (SIGMA I, SIGMA II, and clinical monoplace/multiplace)
• Sechrist Industries (H-Series, 2500, 2500B, 3200, 3600H)
• HAUX-LIFE-SUPPORT (HAUX-STARMED multiplace)
• Fink Engineering custom multiplace systems
• Hyperbaric USA (Eclipse Elite)
• HPO Tech (ZEUGMA and Turkish medical-grade)
• Bara-Med (XD and full clinical line)
• Drager (HyperMed 220)
• Amron International (350M, 450M, and Pressur-Vak II)
• Biobarica (Revitalair 430F and full lineup)
• BASDA (Oxysys 4500)
• Oxygen Ark (Monoplace Series 301)
• Waleeta (WOX-820V)
• OneBase Health (Aviv-branded and OneBase-branded consumer chambers)
• Henshaw Hyperbaric (1.5 ATA and 2.0 ATA hard-shell series)
• iHeal / Hyperbaric Pro (imported 1.3 ATA soft-shell lineup)
• iHyperbaric and Hytech (IHC Hytech clinical chambers)
• Tekna Manufacturing (medical monoplace and multiplace systems)
• ETC Environmental Tectonics / ETC Hyperbaric (BARA-MED family, government/clinical)
• OxyHeal Health Group (multiplace clinical systems)
• Gulf Coast Hyperbarics (custom monoplace/multiplace)
• OxyTechNova / O2life (Nanjing-based OEM chambers sold under multiple house brands)
• OxyBoss (Chinese-made wellness chambers, various rebrands)
• Foshan Mic Medical OEM chambers
• Higher Dose and other spa/wellness OEM-branded chambers
• Longevity Hub / Vitaeris rebrands
• Nuvo Health, OxygenGO, and other US-market wellness rebrands of Chinese OEM chambers
• Zhengzhou Olive OEM-produced units sold under third-party wellness brands worldwide
• Hangzhou Yilong / O2bay wellness chambers
• Shenzhen Holsomed and other OEM soft/hard-shell chambers
• Prestige Hyperbaric chambers (Sphere of Power, Vessel of Power, Pavilion of Power series)

If you have a chamber not listed here, contact us at prestigehyperbaric@gmail.com or 727-591-4268 — our masks and hoses use standard oxygen fittings and are compatible with essentially every hyperbaric chamber in use today. Because so many wellness chambers are OEM-produced in China and rebranded for the US market (soft-shell 1.3 ATA and hard-shell 1.5–2.0 ATA), our masks work with virtually every consumer, wellness, and clinical chamber in circulation.

Research & Evidence

Backed by Peer-Reviewed Research

Hyperbaric oxygen therapy works because pressurized oxygen dissolves into blood plasma at levels far higher than normal breathing allows — reaching tissues that regular circulation cannot. The efficiency of that oxygen delivery depends heavily on the mask and delivery system used inside the chamber.

Learn more about the science behind hyperbaric oxygen therapy and how oxygen delivery efficiency impacts therapeutic outcomes:

• The Science of HBOT — How pressurized oxygen therapy works at the cellular level
• Conditions & Applications — Evidence-based uses for HBOT
• Case Studies — Real-world clinical outcomes
• Full Research Library — Complete evidence base
• Peer-Reviewed Sources — Citation index

Warranty & Satisfaction

Prestige Hyperbaric Quality Standard

Every product in the Prestige Hyperbaric oxygen mask line is selected and inspected to meet our elevated quality standard for hyperbaric use:

• Premium materials — softer medical-grade silicone and rubber for comfort during longer HBOT sessions
• Upgraded head straps — softer, more elastic construction that stays comfortable across full 60–90 minute treatments (unlike hard-plastic straps common in budget masks)
• Oxygen-safe fittings — designed for the higher flow rates and pressures used in hyperbaric applications
• Clean-room packaged — every unit sealed for hygiene from factory to patient
• Backed by our 30-day satisfaction guarantee — if the product doesn't meet your expectations, return it for a full refund

---